dear vmexperts,
I have three esxi hosts with single hba card with two cables connected to them. have two hp san fc switches. one cable goes to swtich A and other one goes to switch B.
THe san is HP MSA 2000 FC with dual controllers each controller with two fc ports. CONTROL A FCA and CONTRLLB FCA goes to switch A and CONTROLA FCB and CONTROLB FCB goes switch B.
zoning on the switches is typical zoning with two ports assigned as storage and rest as HBAS so storage and hbas are connected as per the zoning.
when only one switch was configured or zoned i was able to see the luns on the esxi but when i configured the second switch the same way as switch A none of the hosts can seee the LUNS from the san .
pretty much stuck here any help is appreciated.
thanks
manek