Hi,
we have a problem on a windows 2008 R2 SP1, after we changed all ten e1000 Nic's into vmxnet3 adapter type.
After we have booted the server, all ten adapters are installed an visible in the Windows Device Manager. Only the last
started LAN Adapter was marked with an exclamation mark (Code 12, not enough ressources). If i disable another
LAN adapter, the previously marked adapter would start and the network connection is up and running.
Could this unexpected behavior be a problem in the used VMware Tools 8.6.5, build-652272 on the ESXi 5.0.0 702118?
Best regards,
Markus