Regards to all,
I just bought a new server (HP DL380 G8-Intel Xeon E5-2650 64 GB RAM) on which I installed VMware esxi 5.
in the data center I had 3 host esxi 4.1. I raised vcetner on the new server, version 5, and I put one of 3 esxi ver 4 to new vcenter.
everything seemed perfect to begin with.
I wanted to migrate machines from ver 4 to 5 and to gradually raise the entire dc to version 5, but there was problem with the migration.
"host CPU is incompatible with thw virtual machine's requirements at CPUID level 0x1 register 'ecx'. Host bits : 0000:0000:0000:0000:0010:0010:0000:0001
required> x0xx:xx1x:10x1:1xx0:xxxx:xx1x:xxxx:xx11
mismath detected for these features:
*PCLMULQDQ
*SSE4.1
*SSE4.2
*AES-NI
if posible, use cluster with Enhchanced vMotion Compatibility (EVC) enabled; see KB article 1003212. In the absence of EVC, see article 1993.
OK, no problem. I turn off the machine, and migrate it at power off state. i install esxi 5 to one of the hosts, and try on this new server to transfer powered on machine from new esxi5, but again without success.
I used VMware-CPU-Compatibility-exp-160 658 and I got the following results.
pls help